Non-Parametric Geometry Catalog¶
This catalog shows the available selections for scalable static or moving bodies to add to your model. Non-parametric geometry parameters are not editable, they can only be scaled uniformly. These include geometries typical of vendor systems.
Baffles¶
Description |
Geometry |
---|---|
3-finger baffle |
![]() |
C baffle |
![]() |
Sensor baffle |
![]() |
Fin baffle |
![]() |
H baffle |
![]() |
Beavertail baffle |
![]() |
Impeller: Bottom Mounted Magnetic¶
Description |
Geometry |
---|---|
MBE 80mm | Pharmaceutical and biotechnology blending applications. |
![]() |
MBE 130mm | Pharmaceutical and biotechnology blending applications. |
![]() |
Bottom Mounted Mag 100 | Pharmaceutical and biotechnology blending applications. |
![]() |
Bottom Mounted Mag 150 | Pharmaceutical and biotechnology blending applications. |
![]() |
Bottom Mounted Mag 200 | Pharmaceutical and biotechnology blending applications. |
![]() |
Bottom Mounted Mag 250 | Pharmaceutical and biotechnology blending applications. |
![]() |
Bottom Mounted Mag 300 | Pharmaceutical and biotechnology blending applications. |
![]() |
Magnetic Mixer 11.75in | Pharmaceutical and biotechnology blending applications. |
![]() |
MBE 105mm | Pharmaceutical and biotechnology blending applications. |
![]() |
Magnetic Mixer 8in | Pharmaceutical and biotechnology blending applications. |
![]() |
Magnetic Mixer 6in | Pharmaceutical and biotechnology blending applications. |
![]() |
Impeller: Gas Dispersion¶
Description |
Geometry |
---|---|
Gas dispersion | Curved disc. |
![]() |
Gas dispersion | Self Aspirating. |
![]() |
Gas dispersion | Self Aspirating. |
![]() |
Impeller: Glass-lined Series D¶
Description |
Geometry |
---|---|
Trapezoidal | Glass-lined trapzoidal impeller. |
![]() |
Hydrofoil | Glass-lined hydrofoil impeller. |
![]() |
Hydrofoil 2 | Glass-lined hydrofoil. Axial flow mixing applications in glass-lined reactors. |
![]() |
Impeller | Retreat-like glass lined impeller. |
![]() |
Frame | Glass-lined frame impeller. |
![]() |
Anchor | Glass-lined anchor impeller. |
![]() |
Turbine | Glass-lined turbine. |
![]() |
Impeller: Glass-lined Series P¶
Description |
Geometry |
---|---|
ANC | |
![]() |
GST | |
![]() |
TBF | |
![]() |
CBR | |
![]() |
RCI | |
![]() |
RBT | |
![]() |
PBT | |
![]() |
MSG | |
![]() |
FBT | |
![]() |
TBX | |
![]() |
FDT | |
![]() |
CBT | |
![]() |
MXT | |
![]() |
Impeller: High Efficiency¶
Description |
Geometry |
---|---|
High Efficiency Impeller 1 | Turbulent flow blending applications and solids suspension. |
![]() |
High Efficiency Impeller 2 | Turbulent flow blending applications and solids suspension. |
![]() |
High Efficiency Impeller 3 | Turbulent flow blending applications and solids suspension. |
![]() |
Impeller: High Shear¶
Description |
Geometry |
---|---|
Sawtooth (high tooth count) | High shear applications. |
![]() |
Sawtooth | High shear applications. |
![]() |
Impeller: High Solidity¶
Description |
Geometry |
---|---|
Draft Tube Impeller 2 | Turbulent up-pumping mixing applications. |
![]() |
Marine Impeller | High impeller speed, high pumping applications. |
![]() |
Hydrofoil | Axial flow impeller. |
![]() |
Side Entry Impeller | |
![]() |
Draft Tube Impeller 1 | |
![]() |
Split Disc | Pharmaceutical and biotechnology blending applications. |
![]() |
Impeller: High Viscosity¶
Description |
Geometry |
---|---|
Anchor Impeller | High viscosity blending applications. |
![]() |
High Viscosity Impeller 1 | High viscosity blending applications. |
![]() |
High Viscosity Impeller 2 | High viscosity blending applications. |
![]() |
High Viscosity Impeller 3 | High viscosity blending applications. |
![]() |
High Viscosity Impeller 4 | High viscosity blending applications. |
![]() |
High Viscosity 2 Blade | High viscosity blending applications. |
![]() |
High Viscosity 3 Blade | High viscosity blending applications. |
![]() |
High Viscosity 4 Blade | High viscosity blending applications. |
![]() |
Single Helical Ribbon with Screw | High viscosity blending applications. |
![]() |
Double Helical Ribbon | High viscosity blending applications. |
![]() |
Impeller: Solid Suspension¶
Description |
Geometry |
---|---|
Solid Suspension 4 | |
![]() |
Solid Suspension 2 | |
![]() |
Solid Suspension Impeller 1 | Mass transfer and gas bubble dispersion applications. |
![]() |
High Solidity Hydrofoil | Transitional flow blending and/or high concentration solids suspension applications. |
![]() |
Solid Suspension 3 | |
![]() |
Solid Suspension 3 | |
![]() |
Low Level Mixing | Slurry blending and suspension applications. |
![]() |
Impeller: Transitional flow¶
Description |
Geometry |
---|---|
Transitional Flow 2 Blade 25 degrees | |
![]() |
Transitional flow 4 Blade 53 degrees | |
![]() |
Transitional Flow 2 Blade 53 degrees | |
![]() |
Transitional Flow 3 Blade 53 degrees | |
![]() |
Transitional Flow 4 Blade 25 degrees | Higher efficient extension of pitch blade impeller. |
![]() |
Transitional Flow Impeller 1 | Transitional flow. Non-Newtonian/high viscosity blending applications. |
![]() |
Transitional Flow Impeller 2 | Two-fluid transitional flow and/or non-Newtonian blending applications. |
![]() |
Transitional Flow 3 Blade 25 degrees | |
![]() |
Thaletec Impellers¶
Description |
Geometry |
---|---|
THALETEC PBT D1090.stp | Geometry is owned by Thaletec. For more information please contact process@thaletec.com. Axis: 0 0 1 |
![]() |
THALETEC SGT D760.stp | Geometry is owned by Thaletec. For more information please contact process@thaletec.com. Axis: 0 0 1 |
![]() |
THALETEC TAF D990.stp | Geometry is owned by Thaletec. For more information please contact process@thaletec.com. Axis: 0 0 1 |
![]() |
THALETEC TAR D990.stp | Geometry is owned by Thaletec. For more information please contact process@thaletec.com. Axis: 0 0 1 |
![]() |
THALETEC TXF D990.stp | Geometry is owned by Thaletec. For more information please contact process@thaletec.com. Axis: 0 0 1 |
![]() |
THALTEC AMT D1100.stp | Geometry is owned by Thaletec. For more information please contact process@thaletec.com. Axis: 0 0 1 |
![]() |
THALTEC DCT D990.stp | Geometry is owned by Thaletec. For more information please contact process@thaletec.com. Axis: 0 0 1 |
![]() |
THALETEC Anchor D1880.stp | Geometry is owned by Thaletec. For more information please contact process@thaletec.com. Axis: 0 0 1 |
![]() |
THALETEC CXR D1040.stp | Geometry is owned by Thaletec. For more information please contact process@thaletec.com. Axis: 0 0 1 |
![]() |
THALETEC CXU D1040.stp | Geometry is owned by Thaletec. For more information please contact process@thaletec.com. Axis: 0 0 1 |
![]() |
THALETEC DCX D990.stp | Geometry is owned by Thaletec. For more information please contact process@thaletec.com. Axis: 0 0 1 |
![]() |
THALETEC FBT D1090.stp | Geometry is owned by Thaletec. For more information please contact process@thaletec.com. Axis: 0 0 1 |
![]() |
THALETEC GDT D730.stp | Geometry is owned by Thaletec. For more information please contact process@thaletec.com. Axis: 0 0 1 |
![]() |
THALETEC PBX D1120.stp | Geometry is owned by Thaletec. For more information please contact process@thaletec.com. Axis: 0 0 1 |
![]() |
THALETEC RCI CW D1100.stp | Geometry is owned by Thaletec. For more information please contact process@thaletec.com. Axis: 0 0 1 |
![]() |
THALETEC RCiEco D1100.stp | Geometry is owned by Thaletec. For more information please contact process@thaletec.com. Axis: 0 0 1 |
![]() |
Thaletec Tanks¶
Description |
Geometry |
---|---|
BE6300 PowerBaffle Mesh.stl | Importing file: “BE6300 PowerBaffle Mesh.stl”; Using importer: Default; Axis: 0 1 0 |
![]() |
BE6300 DeltaBaffle Mesh.stl | Importing file: “BE6300 DeltaBaffle Mesh.stl”; Using importer: Default; Axis: 0 1 0 |
![]() |
BE6300 Tank Mesh.stl | Importing file: “BE6300 Tank Mesh.stl”; Using importer: Default; Axis: 0 1 0 |
![]() |
User Catalog: Impellers¶
Description |
Geometry |
---|---|
FDT.IGS | Importing file: “FDT.IGS”; Using importer: ScaledImpeller |
![]() |
FBT.IGS | Importing file: “FBT.IGS”; Using importer: ScaledImpeller |
![]() |
User Catalog: Normal¶
Description |
Geometry |
---|---|
A312.IGS | Importing file: “A312.IGS”; Using importer: Default |
![]() |
A310.IGS | Importing file: “A310.IGS”; Using importer: Default |
![]() |
Wave Bag¶
Description |
Geometry |
---|---|
Wave Bag 100 L | Wave bag 100 L capacity. |
![]() |
Wave Bag 10 L | Wave Bag 10 L capacity. |
![]() |
Wave Bag 1 L | Wave Bag 1 L capacity. |
![]() |
Wave Bag 200 L | Wave bag 200 L capacity. |
![]() |
Wave Bag 20 L | Wave bag 20 L capacity. |
![]() |
Wave Bag 2 L | Wave bag 2 L capacity. |
![]() |
Wave Bag 50 L | Wave bag 50 L capacity. |
![]() |